web design by Clann                                                                                                                                         © Planer plc                                                                                                                          

Overview

 

Key Features

• Record of sample temperature
• Soft or hard copy
• Alarms trip points can be set
• Visual LED warning
• User programmable

 

Software

• User programmable
• Archiving facility for logged data
• Hard disk or external drive
• Print in graphical or tabular form
• Specific segments can be printed

 

Temperature check

• Log intervals can be set for each shipment
• Temperature Alarms settable by user
• Logging intervals can be set from 30 seconds to 99 minutes
• Store up to 8,192 entry logs

 

Alarms

• High and low temperature alarms
• Alarm delays programmable
• Temporary removal of cork and cover need not initiate alarm status

 

Precision accuracy

• Probe accuracy of +/- 1.3°C at -200°C
• Battery life of approximately 3 years
• View current temperature via software
• Software settings password protected

 

The temperature sensor is fitted to a plate which prevents physical damage to the sensor and also ensures that the temperature recorded is higher than the temperature in the vicinity of the sample.

 

The ShipsLog™ can also be supplied with a flying lead should it be required to record the temperature within the sample area - this unit is not fitted with, or supplied with a cork and cover.

 

Samples may be transported in the knowledge that on arrival at destination the recipient can quickly check via the LED display whether the temperature range has deviated from the pre set profile.

 

The full temperature history can be downloaded if desired to confirm the exact temperature pattern throughout the journey. The logger is user programmable via PC software.

 

The logging process can be started either via the PC software or via a magnetic swipe key - which can be shipped separately from the vapour shipper. Analysis of the data can be made by the sender, the receiver or both.

 

The Planer ShipsLog™
is a datalogger for vapour shippers which will keep an accurate and downloadable temperature history of samples over the duration of the transit.

 

 

 

 

 

 

 

 

 

 

 

 

 

The ShipsLog™ is an on-line monitoring system of temperature history for samples in liquid Nitrogen Vapour Shippers. It provides traceability for the temperature of the samples and can give alarms at setpoints during the transit period.

The ShipsLog™ monitor is fitted in the top of the dry shipper's cover. The temperature probe (PT100) extrudes through the 'cork', monitoring the temperature at the warmest part of the vapour shipper.

 

PDF Leaflet...

PDF Leaflet...